|
Warmup
Settings Help
To save energy, the printer can be set up to go into standby mode
periodically. When it is in standby mode, the printer can take several minutes
to warm up and become ready to print. To save time, you can use the settings
on this page to warm up the printer automatically at specified intervals. To
set warm-up and standby times, select one of the three warm-up modes from the
pull-down menu.
- Intelligent Ready - The printer automatically
monitors printer usage patterns and follows a warm-up schedule based on
printer usage.
- Scheduled - You can select different warm-up
and standby settings for each day of the week by entering these values in
the schedule on this page. For the Standby Settings, if you select Idle
After Timeout, the printer goes into standby mode as specified in the
Power Saver Timeout settings below.
- Job Activated - The printer warms
up when it receives a print job.
Local Date and Time - Reports
the current setting for the printer's clock. Click the link to display the Date
and Time page, where you can set the clock.
Power Saver Timeout
As an alternative, you can set the Power Saver Timeout to control how
long until the printer goes into power saving mode.
|
