|
Clone Printer Help
You can clone selected settings from a Source Printer to
a Destination Printer on the same network using the Clone Printer page.
If you want to clone the selected settings to to a destination printer in a
different domain or zone than the source printer, enter the Zone and Domain
information in the fields below Optional
Settings.
Cloning Settings from One Printer to Another
Select the parameters to be cloned from the Source Printer. You
can choose any combination of the following settings or you can select all by
clicking Check All:
Source Printer Settings
- Usage Profile Properties
- FTP
- EtherTalk
- Information Forwarding
- E-Supplies
- Printer Defaults
- LPR
- Security
- Date and Time
- Warmup
- Control Panel Lockout
- Input Trays
|
- TCP/IP
- Email Server
- Mail Alerts
- USB
- PostScript
- Remote Printing
- IPP (Internet Printing Protocol)
- Port 9100
- SNMP
- PCL
- SSL Configuration
|
Enter the IP Address or DNS Name of the Destination
Printer. If you enter a DNS Name, DNS must be configured on the TCP/IP
page.
Optional Settings
You may assign a Printer Name (SNMP System Name) to the Destination
Printer by entering this name in the Printer Name (SNMP System Name) field.
Modify the EtherTalk Zone and/or IP Domain Name settings if the
Destination Printer will be located in a different Domain / Zone.
Note: EtherTalk Zone and/or IP Domain Name settings will
be cloned only if the EtherTalk and/or TCP/IP settings are selected to be cloned
above.
Confirm Cloning Settings
When you click Clone Selected Settings, the Confirm Cloning
Settings page displays containing your selections. If you are satisfied
with the list of settings to clone, click Clone to continue; otherwise
click Cancel.
| 
