Use this page to configure the printer PCL settings.

To configure the PCL print settings, select the following options:

Paper Tray - Select from which paper tray to print.

Paper Size - Specify the paper size.

Custom Size - Y - Specify the length of your custom paper using a number in the range indicated.

Custom Size - X - Specify the width of your custom paper using a number in the range indicated.

Orientation - Set the paper to print in landscape or portrait orientation. The default setting is Portrait.

2-Sided - Specify 1-sided print or 2-sided print with the option of flipping the page on the long edge or the short edge.

Font - Select the type of font from the drop-down list. The default setting is Courier.

Symbol Set- Select the font used for symbols from the drop-down list. The default setting is ROMAN-8.

Font Size - Specify the default font size, from 4 through 50, in increments of 0.25 from the drop-down list. Available only for typographic fonts.

Font Pitch - Specify the character spacing pitch using a number in the range indicated. The default setting is 10.00.

Form Line - Specify the number of lines per form. You can specify a value from 5 through 128 in increments of 1. The default setting is 64.

Quantity - Specify the number of copies to print. You can specify a value from 1 through 999. The default setting is 1.

Image Enhancement - Set the image enhancement to make the boundary line between black and white smoother. The default setting is Enable.

Hex Dump - Enable the hex dump to print data sent from a computer in the ASCII code to verify the data contents in the hexadecimal notation format. The default setting is Disable.

Draft Mode - Enable to print in draft mode. The default setting is Disable.

Line Termination - Specify how the line terminates either with line feed or carriage return.

Default Color - Set the default color mode to Black or Color. The default setting is Black.

When you are satisfied with your selections, click Save Changes to keep the settings or Discard Changes to keep the previous settings.