Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
PhaserShare


Setting up your Tektronix Phaser printer on an EtherTalk, LocalTalk, or TokenTalk network

Phaser 360 printers
EtherTalk, LocalTalk, or TokenTalk
Macintosh and PC platforms

This is the procedure for installing your Tektronix color printer on EtherTalk, LocalTalk, or TokenTalk networks using Macintoshes or PC's. Click on the links below to obtain detailed instructions on each step.
  1. If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now.

  2. Connect the printer to the network (click on the type of interface you are using):

  3. Print a configuration page.

  4. Check the printer's name and zone on the page. If you need to change them, click on the following links for instructions:

This completes the configuration.

To print, you need to find your printer's name in the Chooser; if you need help with this, click here.

Problems? See Troubleshooting.

Return to Networking Topic List
Support Home Page
Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program