• Send the appropriate PostScript file to the printer; see Changing the printer's zone: PhaserLink software.

• With a TCP/IP connection and a World Wide Web browser, you can use PhaserLink software; see Changing the printer's zone: PhaserLink software.

• With a PC running Windows on a NetWare network, you can use the PhaserShare Administrator; see Changing the printer's zone: PhaserShare Administrator.

1. From the printer's home page, click the Configuration button; this displays the View and Configure Settings page.

2. On the View and Configure Settings page, click the link to the View and Configure Interface Settings page.

3. On the View and Configure Interface Settings page, click the link to the appropriate page: View and Configure EtherTalk Settings, View or View and Configure TokenTalk Settings.

4. Enter the desired zone in the Zone field.

Changing the printer's zone: PostScript utility files

1. Open the file using any text editor. (To ensure that the file remains pure PostScript, it is recommended that you use a "plain text" editor such as TeachText or SimpleText, rather than a word-processing application like Microsoft Word. If you must use a word-processing application, make sure that you save the file as plain text.)

2. Find the line:
   (My Zone Name)

   Replace the text inside the parentheses with the zone name you want to use.

   Save the file as plain text.

   Use the Apple Printer Utility to send the PostScript file; see Sending PostScript files to the printer: Apple Printer Utility.

---

Note: If there is already a printer with the same name in the new zone, the new printer appears on the network with a number added to the name. See Notes regarding printer names.

---

1. In the PhaserShare Administrator Main window, select the desired printer from the Printer List.

2. Display the Protocol Settings dialog box.
   1. In the Main window, click the Configure Printer button; this displays the Configure Printer dialog box.

   2. In the Configure Printer dialog box, click the Ethernet tab; this displays the Ethernet tab.

   3. In the Ethernet tab, click the Protocol Settings button; this displays the Protocol Settings dialog box.

3. In the Protocol Settings dialog box, click the EtherTalk tab; this displays the EtherTalk tab.

4. In the EtherTalk tab, enter the desired zone in the Zone field.

5. Click OK. On the Phaser 380, 350, 340, 560, 550, 540, and 600 printers, a dialog box is displayed reminding you to reset the printer. Click OK to reset the printer.