Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
PhaserShare


Network installation overview
Step 1

Unpack and set up the printer.

This step must be done before attempting to configure the printer on a network. Printer setup includes installing ink or toner, loading paper trays, and turning on the printer. See your printer's user documentation for information about printer setup.

Step 2

Install the PhaserShare network card in the printer.

This step is necessary if the printer is to be equipped with an optional network card. It is not necessary when using the printer's built-in Ethernet connector. This step is done at the factory when a network card is purchased initially with your printer.

When a network card is purchased later as an upgrade kit, follow the appropriate installation instructions:

PhaserShare Series B interfaces:

PhaserShare network cards:

Information on physically connecting the printer to networks is provided in this guide:

PhaserShare Series B interfaces:

PhaserShare network cards:

Step 3

Network configuration.

For LocalTalk, EtherTalk, or TokenTalk, see EtherTalk, LocalTalk, and TokenTalk Configuration.

For NetWare, see NetWare: Phaser 360 printers.

For TCP/IP, see:

For Windows NT, see Windows NT.

For OS/2, see TCP/IP Configuration (OS/2 Warp/LAN Server)

Step 4

Install the PhaserShare Status Monitor.

This step is for NetWare installations only. Install the PhaserShare Status Monitor software on all platforms running Windows. For more information, see Installation.

Return to Networking Topic List
Support Home Page
Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program