The PhaserShare Series B TCP/IP interface is compatible with Windows NT 3.5 (and later versions). Before you begin, make sure that the printer is connected to the network.

---

Note: The procedures in this guide are valid for Windows NT version 3.x and 4.x. For information about driver installation for later versions of Windows NT, contact Tektronix technical support or visit the Tektronix web site:

http://www.tektronix.xerox.com/support

---

Assigning the printer's IP address

Adding the Windows NT 4.0 driver on a Windows NT 4.0 server or workstation

Adding the Windows NT 4.0 driver on a Windows NT 3.51 server

Adding a Windows NT 3.x driver

Windows NT network communication

TCP/IP connection

Windows NT network troubleshooting

Error messages in Print Manager

Printing a file via lpr from the command line

Checking the IP address of the Windows NT server