|
Setting up your Tektronix printer on a NetWare network
|
Phaser 360 printers
4.x in Bindery mode
DOS platforms
This is the procedure for installing your Tektronix color printer on NetWare 4.x (Bindery mode) networks using DOS. Click on the links below to obtain detailed instructions on each step.
- If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now.
- Connect the printer to the network (click on the type of interface you are using):
- Print a configuration page.
- Use PCONSOLE to set up the print server and queues.
- You will be using NWSET to configure the printer. If you have not yet installed NWSET, install it now.
- Use NWSET to configure the printer for Bindery connection mode.
This completes the configuration.
Problems? See Troubleshooting DOS configurations.
Return to Networking Topic List
|
| |
|
