1. Log in with ADMIN bindery privileges.

2. Launch the NetWare utility PCONSOLE. If logged in with an NDS connection, navigate the DS Tree to the Bindery Context and press the F4 key to switch to Bindery mode.

3. From the Available Options menu, select Quick Setup and press the Enter key. The Print Services Quick Setup window is displayed.

4. The first available print server is displayed by default. Press the Enter key to display the list of all available print servers. Press the Insert key, then enter the printer's default print server name, and press Enter. The default print server name is in the following syntax:
   TEKxxxxxx

   where xxxxxx is the last six hex digits of the printer's Printer ID.

   The printer's print server name is listed on the Configuration Page. For information on printing a Configuration Page, see The printer's Configuration Page.

   When you have entered the default print server's name, press Enter. The new name is displayed in the Print Services Quick Setup window.

   Press the down arrow key to select the New Printer field. P1 is the default name. Press the Enter key to edit this name as desired. When done, press the Enter key to return to the Print Services Quick Setup window.

   Press the down arrow key to select the New Print Queue field. Q1 is the default name. Press the Enter key to edit this name as desired. When done, press the Enter key to return to the Print Services Quick Setup window.

   Press the down arrow key to select the Printer Type field. Parallel is the default name. Press the Enter key to display the Printer Type list. Select Other/Unknown and press the Enter key to return to the Print Services Quick Setup window.

   Press the up arrow key to select the Banner Type field. Text is the default name. Press the Enter key to display the Banner Type list. Select Postscript, then press the Enter key to return to the Print Services Quick Setup window.

   Press the Escape key once. PCONSOLE prompts you to Save Changes. Select Yes. Press the Escape key again and exit PCONSOLE.

1. Start NWSET:
   1. Change (CD) to the directory that contains NWSET.EXE. For example, if NWSET.EXE is in F:PUBLIC, type:
      F:
      CD PUBLIC

      Type:

   NWSET

   Pull down the Select A Printer menu to display the list of available Tektronix printers and select the Tektronix printer you wish to configure. The factory default print server name is in the following syntax:

   TEKxxxxxx

   where xxxxxx is the last six hex digits of the printer's Printer ID.

   ---

   Note: If the printer does not appear in the list of available printers, you could have a network hardware problem or an incorrect frame type (see Printer does not appear in NWSET).

   ---

   When you have selected a Tektronix printer, a dialog box is displayed. Enter your user name and password.

   ---

   Note: If you are already logged in to another printer, you will be prompted to log off before logging on to the new printer.

   ---

   Select the Quick Configuration menu; the Settings dialog box is displayed. Fill in the parameters for the printer by clicking on the settings to be made.

   The settings listed in the following table are required; other settings are optional:

   Parameter	Setting
   Connection Mode	Bindery
   Primary File Server	The name of the file server you configured using PCONSOLE

   When you have the settings the way you want them, select Apply/Reset Print Server to enter the settings into the printer.

   Select Exit to exit NWSET. The printer should now be ready to start printing; if not, refer to Troubleshooting DOS configurations.

If you change the Print Server name on the printer using NWSET, you must use PCONSOLE to change the print server name on every file server to be used by that printer.

---

Note: In NWSET, if a password was set previously, the old password is not displayed in the Login Password dialog box. To change the password, you must enter the old password and the new password.

---