1. Log in with supervisor privileges.

2. Launch the NetWare utility PCONSOLE.

3. From the Available Options menu, select Print Server Information and press the Enter key. The Print Servers menu is displayed.

4. Press the Insert key, then enter the printer's default print server name, and press Enter. The default print server name is in the following syntax:
   TEKxxxxxx

   where xxxxxx is the last six hex digits of the printer's Printer ID.

   The printer's print server name is listed on the Configuration Page. For information on printing a Configuration Page, see The printer's Configuration Page.

   When you have entered the default print server's name, press Enter. The new name is added to the Print Servers menu.

   With the Print Server name highlighted, press Enter to display the Print Server Information submenu. Select Print Server Configuration and press the Enter key.

   In the Print Server Configuration Menu, select Printer Configuration and press the Enter key.

   In Configured Printers, select the first printer in the list and press the Enter key. The Printer Configuration menu is displayed.

   Change these settings:

   • Set Name to any desired name.

   • Set Type to Remote Other/Unknown.

   • For the rest of the options on the list, the default setting is recommended.

   Save the changes and return to the Available Options menu:

   • Press the Escape key and select Yes when prompted to save changes.

   • Press the Escape key four times to return to the Available Options menu.

1. From the Available Options menu, select Print Queue Information. A list of queues is displayed.

2. Insert a new queue or select an existing queue.
   • To insert a new queue, press Insert, type the queue name, and press the Enter key. Select the new queue and press the Enter key. When the Print Queue Information menu is displayed, go to Step 3.

   • To use an existing queue, select the queue and press the Enter key. When the Print Queue Information menu is displayed, go to Step 3.

3. Select Queue Servers from the Print Queue Information menu.

4. Press the Insert key to display the list of all Queue Server Candidates.

5. Select the server you created in Step 4 under the topic Adding a print server, and press the Enter key.

6. Press the Escape key three times to return to the Available Options Menu.

1. Select Print Server Information and press the Enter key.

2. Select the print server you created in Step 4 under the topic Adding a print server, and press the Enter key.

3. In the Print Server Information submenu, select Print Server Configuration Menu, and press the Enter key.

4. In the Print Server Configuration menu, select Queues Serviced by Printer, and press the Enter key.

5. The Defined Printers window is displayed. Highlight the Defined Printer you just created and press the Enter key.

6. The File Server / Print Queue window is displayed. Press the Insert key to display the Available Queues window. Select the appropriate Print Queue and press the Enter key.

7. PCONSOLE prompts you for the priority level of the print queue. The default priority is 1 and does not need to be changed. Press the Enter key.

8. Press the Escape key six times to exit PCONSOLE.

If you use Change Password in PCONSOLE, the password is not sent to the printer. Use NWSET to set the printer password.

Printer configuration using NWSET

1. Start NWSET:
   1. Change (CD) to the directory that contains NWSET.EXE. For example, if NWSET.EXE is in F:PUBLIC, type:
      F:
      CD PUBLIC

      Type:

   NWSET

   Pull down the Select A Printer menu to display the list of available Tektronix printers and select the Tektronix printer you wish to configure. The factory default print server name is in the following syntax:

   TEKxxxxxx

   where xxxxxx is the last six hex digits of the printer's Printer ID.

   ---

   Note: If the printer does not appear in the list of available printers, you could have a network hardware problem or an incorrect frame type (see Printer does not appear in NWSET).

   ---

   When you have selected a Tektronix printer, a dialog box is displayed. Enter your user name and password.

   ---

   Note: If you are already logged in to another printer, you will be prompted to log off before logging on to the new printer.

   ---

   Select the Quick Configuration menu; the Settings dialog box is displayed. Fill in the parameters for the printer by clicking on the settings to be made.

   The settings listed in the following table are required; other settings are optional:

   Parameter	Setting
   Connection Mode	Bindery
   Primary File Server	The name of the file server you configured using PCONSOLE

   When you have the settings the way you want them, select Apply/Reset Print Server to enter the settings into the printer.

   Select Exit to exit NWSET. The printer should now be ready to start printing; if not, refer to Troubleshooting DOS configurations.

If you change the Print Server name on the printer using NWSET, you must use PCONSOLE to change the print server name on every file server to be used by that printer.

---

Note: In NWSET, if a password was set previously, the old password is not displayed in the Login Password dialog box. To change the password, you must enter the old password and the new password.

---