|
Setting up your Tektronix color printer on a NetWare network
|
Phaser 360 printers
NetWare 3.x and 4.x in Bindery mode
Windows platforms
This is the procedure for installing your Tektronix color printer on a NetWare 3.x and 4.x Bindery mode networks using Windows. Click on the links below to obtain detailed instructions on each step.
- If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now.
- Connect the printer to the network (click the type of interface you are using):
- Print a configuration page.
- The PhaserShare Administrator is the preferred tool for this network configuration. If you have not yet installed the PhaserShare Administrator, install it now.
- Use the PhaserShare Administrator to set up the print server and queues.
This completes the configuration.
Problems? See Troubleshooting Windows configurations.
Return to Networking Topic List
|
| |
|
