|
Setting up your printer on an EtherTalk, LocalTalk, or TokenTalk network
|
Phaser 740 and 780 printers
EtherTalk, LocalTalk, or TokenTalk
Macintosh and PC platforms
This is the procedure for installing your Xerox Office color printer on EtherTalk, LocalTalk, or TokenTalk networks using Macintoshes or PC's. Click the links below to obtain detailed instructions on each step. After completing each step, use your browser's back button to return to this page.
- If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now. If you are using the printer's built-in network interface, skip this step.
- Connect the printer to the network (click the type of interface you are using):
- Print a configuration page.
- Check the printer's name and zone on the page. If you need to change them, click the following links for instructions:
This completes the configuration.
To print, you need to find your printer's name in the Chooser; if you need help with this, click here.
Problems? See Troubleshooting.
Return to Quick Network Setup Instructions
Return to Topic List
|
|
| |
|
