|
Setting up your printer on a NetWare network
|
Phaser 740 and 780 printers
NetWare
Windows platforms
This is the procedure for installing your Xerox Office color printer on NetWare networks using Windows. Click the links below to obtain detailed instructions on each step. After completing each step, use your browser's back button to return to this page.
- If you are using a network card, the card must be installed in the printer. If the card is not yet installed in the printer, install it now. If you are using the printer's built-in network interface, skip this step.
- Connect the printer to the network (click the type of interface you are using):
- Print a configuration page.
- The PhaserShare Administrator is the preferred tool for printer configuration in this environment. If you have not yet installed the PhaserShare Administrator, install it now.
- Use the PhaserShare Administrator to set up the print server (printer) and to set up queues.
This completes the configuration.
Problems? See Troubleshooting Windows configurations.
Return to Quick Network Setup Instructions
Return to Topic List
|
|
| |
|
