Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Phaser 780


Troubleshooting

If the printer is not in the Chooser, use the following troubleshooting procedure.

  1. Check that the Configuration Page shows a printer name, a node number, and a zone.
    • If there is no node number, verify that the printer is properly cabled to the network. Test the cable segment by plugging in a new cable segment or using the cable segment of a printer that is in the Chooser.
    • If your network uses zones, and there is no zone name on the Configuration Page, or if the Configuration Page shows the wrong zone, see Changing the printer's EtherTalk/TokenTalk zone (optional).

    • NOTE
      The printer cannot create a zone; it must already exist.

  2. If the Configuration Page shows the correct printer name, node number, and zone, and the printer is still not visible in the Chooser, check the following items:
    • If there is a Novell NetWare server on the network, verify that the NetWare server has been configured for Phase 2 routing and addressing.
    • If there is a Windows NT server on the network, verify that the printer has not been captured by a Windows NT machine.
    • If the printer continually reboots when connected to the network, it is possible that a router is broadcasting a zone of *, which is an invalid zone.
    • If using QuickDraw GX, the GX drivers must be installed. If you don't use QuickDraw GX, disable the QuickDraw GX, QuickDraw Helper, and ColorSync extensions.

 


Return to Topic List
Support Home Page
Phaser 780 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program