---

Note: There are different ways to improve print speed, such as by printing over Ethernet. For more information, visit the Tektronix web site. Refer to On-line support.

---

All users

• When you use any color correction option (other than None), your printer can take longer to process bitmapped images. Select color corrections from the supported drivers, with downloadable utility files, or from the printer's front panel; see TekColor correction descriptions for more information.

• The Fast Color print-quality mode is the fastest mode, followed by the Standard print-quality mode and the Enhanced mode. Select print-quality modes from the supported drivers, from the printer's front panel, or through your web browser; see Adjusting print speed and resolution for more information.

• If you are using Adobe Photoshop, you can print using the Tektronix PhaserPrint software plug-in to improve the image data transfer time from your computer to the printer. See Using the PhaserPrint Plug-In for Photoshop for instructions on installing and using the plug-in.

---

Note: Use the following procedure only if your computer is connected to the printer through the parallel port. Do not do this procedure if the printer is connected over a network port.

---

1. From the Control Panel, double-click Printers.

2. In the Printers dialog box, select the Tektronix Phaser 360 printer, then click Setup. A dialog box appears with the printer's name across the top.

3. Click the PostScript tab.

4. In the Performance Options field, select the Use PostScript Level 2 Features option.

5. Click the Job Control tab.

6. For better performance, select the Binary Mode option.

7. From your application, choose the Tektronix Phaser 360 as your printer.

8. Try printing the document again.

1. In the task bar on your screen, click the Start icon; a menu appears.

2. Move the cursor over Settings; another menu appears.

3. In the menu, click Printers; the Printers window appears.

4. In the Printers window, select the Phaser 360 printer icon. From the File menu, select Properties.

5. Click the PostScript tab, then click the Advanced button.

6. Select Use PostScript Level 2 features.

7. Under Data format, select Binary communications protocol. Do not make this selection if the printer is connected over a network port.

8. Click Apply and then OK when finished.

9. Try printing the document again.