Printers & Supplies
Solutions & Services
Customer Support
Partners
There are several ways to print the Configuration Page:
Printing the Configuration Page with a downloadable utility file
Printing the Configuration Page with PhaserLink software
Help Pages
<---- ----> Menu
Press the Menu button to access the Help Pages. The following message appears:
Menu Map
<---- ----> Print
Press the left arrow (<----) or right arrow (---->) buttons until the following message appears:
Configuration Page
Press the Print button to print a Configuration Page.
PC utility file: PRNTCNFG.PS
Locate the Apple Printer Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.
In the Printer Selector dialog box, make the following selections:
Under Printers, select your Phaser 360 printer.
Click Open Printer.
A dialog box appears with the selected zone and printer name at the top.
Select the PhaserTools folder.
Select the Configuration Page file and click Add.
Click Send to download the file to the printer.
At the prompt Save PostScript output as you are asked for a file name for saving printer output. Use the default name given in the edit box or type in a new name. (Printer output includes status messages generated by the printer reporting such conditions as out of paper.)
Click Save.
If no output is returned by the printer, the Apple Printer Utility displays a dialog box; click Continue.
If output is returned by the printer, you won't see this dialog box; check your hard disk for the file created by the utility for the printer's output.
Locate the utility files in the PHSR360 subdirectory inside the PHSRTOOL directory created on your hard disk by the printer's installer.
Use one of the following methods to send the PRNTCNFG.PS file to the printer:
Workstation users: Send the file to the printer as you would any PostScript file.
