• Installing the Macintosh utility files

• Installing the PC utility files

• Downloading files from the Tektronix World Wide Web site

• Downloading files from the Tektronix ftp server

1. Insert either the printer's CD-ROM or Phaser 360 Color Printer Installer for Mac® OS Disk 1 into the appropriate drive.

2. Double-click the Phaser 360 Installer icon. Click Continue until the Easy Install window appears.

3. Select Custom Install from the pull-down menu.

4. Select the Printer Utilities item from the list.

5. Click Install.

Installing the PC utility files

1. Insert the printer's CD-ROM or Phaser 360 Color Printer Installer for Windows Disk 1 into the appropriate drive on your computer.

2. Do one of the following depending on your computer system:

   Windows 95 and Windows NT 4.0:

   1. Click the Start icon in the taskbar on your screen. In the menu that appears, click Run.

   2. In the Run window, type in the drive for the CD-ROM or diskette, followed by the file name SETUP, and click OK. For example: D:SETUP

   Windows 3.1 and Windows NT 3.51:
   1. In the Program Manager, select Run from the File menu.

   2. At the Command Line, type in the drive for the CD-ROM or diskette, followed by the file name SETUP, and click OK. For example: D:SETUP

3. Click Next in the two introduction screens in the Installer.

4. In the Select Installation Type dialog box, select Custom Install and click Next.

5. In the Driver Installation screen, click Clear All if you don't want to install drivers at this time. Then click Next.

6. In the Custom Install: Select Utilities dialog box, select the Printer Utilities option, and click Next. Files are copied to your hard disk.

7. In the Finish Installation dialog box click Next.

   The software is installed in a PHSR360 directory, inside a PHSRTOOL directory created on your hard disk by the printer's installer.

1. Enter the following address in the address line of your web browser:
   ftp://ftp.tek.com/bbs

   Click on the appropriate platform (macintosh, pcs, or unix).

   Click on 360 for Phaser 360 printer-specific files.

   Select the files you need; the system prompts you to select a location for downloading the files.

If you can exchange electronic mail with other Internet sites, you can access the Tektronix ftp server. From this server you can retrieve driver and utility files and color printer information.

To log onto the Tektronix ftp server and download utility files, follow these steps:

1. Type the following at the system prompt, and press the Return key:
   ftp ftp.tek.com

   The system responds:

   Name (ftp.tek.com:<login name>) :

   Type anonymous and press the Return key.

   The system responds:

   Guest login ok, send your complete e-mail address as password.

   Enter your e-mail address and press the Return key.

   Change directories to your printer-specific directory:

   cd UNIX

   Connect to the directory that matches your platform.

   To download the utility files, type the following command:

   mget *

   The system prompts you for each file in the directory, to which you respond y (yes) or n (no).

   To exit the ftp session, type quit or bye; then press the Return key.