|
At a glance
|
|
Installation of your printer involves these tasks:
- Setting up the printer
Putting all the pieces together: unpacking the printer and accessories, installing the optional Lower Paper Tray Assembly, installing the optional Phaser CopyStation, loading the media tray(s), loading ink sticks, and installing the maintenance tray.
Note: Refer to the Phaser 350 On-line
Reference Guide for instructions on installing a SCSI hard
disk for font storage and print collation.
- Connecting the printer
- Selecting a language for the front panel
- Installing the printer's software
Using the Printer Software diskettes or the printer's CD-ROM to install software, for example, drivers, PostScript Printer Description (PPD) files and utility files, on a Macintosh, or a PC running Windows 95, Windows 3.1, or Windows NT.
Caution: To ensure proper printer operation, install the printer on a flat
surface having no more than 3 degrees of tilt. This is
approximately equivalent to lifting one side of the printer 2 cm
(0.75 in) off of a flat surface.
Return to Phaser 350 Topic List
|
| |
|
