• Before you begin

• Cables and media

• Ink loader

• Clean-up

• Repack the printer

1. Empty the waste bin (refer to the instructions on Before moving the printer); then turn the printer off.

2. Let the printer cool down for 15 minutes before you move it so that the ink has time to solidify.

1. Remove the power cord and any network cables.

2. Open the top cover and paper roll cover; rewind the media onto the roll and remove the roll.

3. Remove the paper roll from the holder and repack the paper roll in its original shipping box.

4. Re-insert the empty paper roll holder into the printer; close the paper roll cover.

1. Open the ink loader cover and remove any unused ink sticks. You can use tweezers to remove any ink sticks that you cannot remove with your hands.

2. Use an alcohol swab to clean inside the ink loader (see Ink loader).

3. Detach the ink loader from the printer and repack it in its original shipping box.

1. Use a lint-free cloth to wipe off any dirt, dust, or oil in and on the printer.

2. Repack any other accessories in the original Xerox shipping box(es). If you do not have the original Xerox shipping boxes, contact Xerox for a repackaging kit.

1. Re-insert these shipping restraints:
   1. Transit restraint for the printhead.

   2. Shipping blocks for the fuser.

   3. Shipping block for the top cover latch.

2. Close all doors and secure them with adhesive tape.

3. Retract the leveling legs under the printer; this allows clearance for the printer to move freely on its wheels.

4. Unlock the front casters (push the locking lever to the up position.

5. Attach the pallet ramps to the pallet (refer to the Phaser 600 Repacking Instructions).

6. Carefully guide the printer onto the pallet.

   ---

   Warning: Because of its size and weight, always use two people to move the printer off or onto the ramps. Failure to do so may injure a person or damage the printer.

   ---

7. Secure the printer to the pallet with the original packing materials.

8. Repack the printer in the original Xerox shipping box. If you need replacement packaging, contact Xerox for the Repackaging Kit.

9. Use the restrapping kit to secure the printer and its components.

---

Caution: To keep your warranty valid, you must first empty the waste bin, remove the ink sticks from the ink loader, detach the ink loader, replace the transit restraint on the printhead, then ship the printer in its Xerox shipping box with the appropriate packing materials. Call Xerox at 1-800-835-6100 or your nearest Xerox dealer for replacement packaging.

---