Printers & Supplies
Solutions & Services
Customer Support
Partners
Note: The PostScript code contained in the file NWCONFIG.PS is also available in a Macintosh file called Configure NetWare. To configure your printer for NetWare 4.x from a PC using the file NWCONFIG.PS, you must edit the file and send it to the printer. When you edit the file, you need to supply the following information:
Note: The PostScript code contained in the file NWCONFIG.PS is also available in a Macintosh file called Configure NetWare.
Print Server Name
Primary File Server
NDS Tree
Transmission Frame Types On/Off for each frame type
Send the file to the printer by any convenient method. Since the printer is not yet set up for NetWare operation, you cannot send the file to the printer over a NetWare connection; use a parallel, EtherTalk, TokenTalk, LPR, or AppSocket connection.
To use ADDCTRLD.BAT to add Control-Ds to the file NWCONFIG.PS, type the following command:
ADDCTRLD NWCONFIG.PS
After you send the file to the printer, you must reset the printer before the configuration will take effect. For more information about resetting the printer, see Resetting the Printer.