PhaserShare

NetWare 4.x (NDS mode) Network configuration (PCONSOLE Quick Setup) Log in with ADMIN privileges. Enter PCONSOLE by typing: PCONSOLE Change Context to the correct location in the Directory Services tree for creating the printer objects. For more information on navigating the DS Tree, see the NetWare user documentation. From the Available Options menu, select Quick Setup. The Print Services Quick Setup template is displayed, with default values assigned. If desired, change the print server name, printer name, print queue name, or print queue volume. Change the Printer Type to Other/unknown. Change the Banner Page Type to PostScript. Press F10 to save the setup and return to the Available Options Menu. Press Escape to exit PCONSOLE. Printer configuration using NWSET Use this procedure to perform a quick configuration using the default parameters supplied by NWSET. Before beginning this procedure, make sure that the printer is connected to the network and turned on. Start NWSET: Change (CD) to the directory that contains the tool. For example, if the tool is in F:PUBLIC, type: F: CD PUBLIC Type: NWSET Pull down the Select A Printer menu. NWSET begins a discovery procedure to display the list of available Tektronix printer found on the network. Select the Tektronix printer you wish to configure. The default print server name is in the following syntax: TEKxxxxxx where xxxxxx is the last six hex digits of the printer's Printer ID. Note: If the printer does not appear in the list of available printers, you could have a network hardware problem or an incorrect frame type (see Printer does not appear in NWSET). When you have selected a Tektronix printer, a dialog box is displayed. Enter a user name and password with ADMIN privileges. Click the OK button. Note: If you are already logged in to another printer, you will be prompted to log off before logging on to the new printer. Select the Quick Configuration menu; a dialog box is displayed. Fill in the parameters for the printer: The settings listed in the following table are required; other settings are optional: Parameter Setting Connection Mode NDS NDS Tree User defined NDS Context User defined When you have the settings the way you want them, select Apply/Reset Print Server to enter the settings into the printer. Select Exit to exit NWSET. The printer should now be ready to start printing; if not, refer to Troubleshooting DOS configurations. Return to Networking Topic List						Support Home Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program