Setting IPX frame types: Phaser 840

1. When the front panel displays READY TO PRINT, press the down-arrow button until Menu is highlighted. Press Select.
2. Press the down-arrow button until Printer Configuration is highlighted. Press Select.
3. Press the down-arrow button until Network Settings is highlighted. Press Select.
4. Press the down-arrow button until NetWare is highlighted. Press Select.
5. Press the down-arrow button until IPX Frame Type is highlighted. Press Select.
6. Press the down-arrow button until the desired frame type is highlighted. Press Select until On is displayed. If desired, you can set more than one frame type.
7. To return the printer to normal operation, press the down-arrow button until Exit is highlighted. Press Select.

Setting IPX frame types: Phaser 740 and Phaser 360 printer

If you are attempting to perform any front panel procedure and you don't see the expected menu choices, the front panel may be locked. For information on how to unlock it, see If the front panel is locked.

1. Enter the Network Settings menu:
1. Press Menu; the front panel displays Help Pages.
2. Press ----> or <---- until the front panel displays Network Settings.
3. Press Menu; the front panel displays TCP/IP.
2. Access the menu of frame types:
1. Press ----> until the front panel displays NetWare.
2. Press Menu; the front panel displays Enable Interface.
3. Press ---->; the front panel displays IPX Frame Type.
4. Press Menu; the front panel displays the first in a menu of frame types.
3. 
   Enable or disable the frame type:
1. Press ----> until the frame type you want is displayed.
2. Press Menu to display the current status of the frame type: Enabled or Disabled.
3. Press ----> until the frame type is either Enabled or Disabled, as desired.
4. Press OK to enter your choice into the printer. The front panel briefly displays Selected, then returns to the display of the frame type name.
4. You can set more than one frame type; to set other frame types, repeat Step  3.
5. Return the printer to normal operation:
1. Press Exit (the far left button) until the front panel displays Network Settings.
2. Press Exit again.
• If you have changed any parameters that require a printer reset to take effect, you are prompted to reset the printer. If you press Reset, the printer resets. If you press Resume, the front panel displays Network Settings. Press Exit (the far left button); the printer returns to normal operation, but the changes you have made do take effect until the next time the printer is reset.
• If you have not changed any parameters that require a printer reset to take effect, the front panel displays Ready.

Setting IPX frame types: Phaser 780 printer

1. Enter the Network Settings menu:
1. While Ready is displayed, press Select; the Printer menu is displayed:

Printer Menu Help Pages Menu

2. Press the left or right arrow buttons until the front panel displays Network Settings.

Printer Menu Network Settings Menu

3. Press Menu to enter the Network Settings menu; Network Settings appears on the top line of the display.
2. Access the menu of frame types:
1. Press the right arrow button until the front panel displays NetWare.
2. Press Menu; the front panel displays Interface.
3. Press the right arrow button until the front panel displays IPX Frame Type.
4. Press Menu; the front panel displays the first in a menu of frame types.
3. Enable or disable the frame type:
1. Press the right arrow button until the frame type you want is displayed.
2. Press Menu to display the current status of the frame type: On or Off.
3. Press the right arrow button until the frame type is either On or Off, as desired.
4. Press Select to enter your choice into the printer. The front panel briefly displays Selected, then returns to the display of the frame type name.
5. Press Exit (the far right button) to return to the menu of frame types.
4. You can set more than one frame type; to set other frame types, repeat Step  3.
5. Return the printer to normal operation:
1. Press Exit (the far right button) until Network Settings appears on the top line of the display.
2. Press Exit again.
• If you have changed any parameters that require a printer reset to take effect, you will be prompted to reset the printer. If you press Confirm, the printer resets. To return to normal operation without resetting the printer, press Exit (the far right button); Printer Menu appears on the top line of the display. Press Exit again; the printer returns to normal operation, but the changes you have made will not take effect until the next time the printer is reset.
• If you have not changed any parameters that require a printer reset, press Exit again; the front panel displays Ready.