Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
Phaser 360


The Cleaning Page
The Cleaning Page, a page with a series of narrow, colored stripes, is output each time the printhead is cleaned. More than one page may be printed. This occurs at the following times:

Selecting the Cleaning Page source

 The default source for the Cleaning Page or other paper that the printer uses in its cleaning procedures is the upper tray. When the Lower Paper Tray Assembly is installed, you can ensure that the printer always uses paper from the lower paper tray in its self-cleaning procedures by changing a setting in the printer's front panel as follows:

  1. While the Ready message is displayed, press the Menu button. The printer displays the following message:

    Help Pages

    <---- ----> Menu

  2. Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selections until the following message appears:

    Printer Defaults

    <---- ----> Menu

  3. To access the printer defaults settings, press the Menu button.

  4. Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selection until the following message appears:

    Cleaning Page Source

    <---- ----> Menu

  5. Press the Menu button. The following message appears:

    Cleaning Page Source:Upper*

    <---- ----> OK

  6. Press the right arrow (---->) button once. The following message appears:

    Cleaning Page Source:Lower

    <---- ----> OK

  7. Press the OK button to confirm the setting.

  8. Press the Exit button until the printer displays Ready.

You can also change the default through a utility file. Refer to Using Printer Utilities.

Return to Phaser 360 Topic List
Support Home Page
Phaser 360 Support Page

Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program