Check Print is enabled as a default, with a timeout of 5 minutes: the printer waits 5 minutes after printing the first page of a document before it continues printing. You confirm your choice to continue or cancel the print job at the printer's front panel. To use the Check Print feature:

1. Select Check Print in a supported driver:
   • Windows 95 PostScript driver:

     In the Device Options tab options, in the Printer features field, select Check Print.

   • AdobePS 3 driver for Windows 3.1:

     In the Features tab options, select Check Print.

   • LaserWriter 8.x driver:

     In the Print dialog box, click Options. In the Options dialog box, in the Check Print drop-down menu, select True.

   • Phaser 360 driver:

     In the Print dialog box, click TekColor. In the TekColor Options dialog box, select Check Print.

   • Phaser 360 GX driver:

     In the Print dialog box, in the TekColor printing extension, select Check Print. (Or, from the Printing menu, in the Printer Driver Defaults, select Check Print.)

2. Go to the printer. Check your first print. At the Check Print message on the printer's front panel, press one of the buttons:
   • Reprint: Reprints the first page, then the printer pauses again for the duration of the selected timeout or until you cancel or continue the print job.

   • Cancel: Cancels the print job.

   • Continue: Continues printing the entire print job.