Phaser 360

Setting timeouts from a Macintosh See Installing the Macintosh utility files to install the printer's software. Locate the Set Timeouts file in the PhaserTools folder on your hard disk, and open the file in SimpleText. Make changes to the timeout values, referring to Timeout values for details. Save the modified file. Locate the Apple Printer Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application. In the Printer Selector dialog box, make the following selections: Under AppleTalk Zones, select your printer's zone location. Under Printers, select your Phaser 360 printer. Click Open Printer. A dialog box appears with the selected zone and printer name at the top. From the File menu, select Send PostScript File. The Select the PostScript files to download dialog box appears. Select the PhaserTools folder. Select your modified timeouts file and click Add. Click Send to download the file to the printer. At the prompt Save PostScript output as you are asked for a file name for saving printer output. Use the default name given in the edit box or type in a new name. (Printer output includes status messages generated by the printer reporting such conditions as out of paper.) Click Save. If no output is returned by the printer, the Apple Printer Utility displays a dialog box; click Continue. If output is returned by the printer, you won't see this dialog box; check your hard disk for the file created by the utility for the printer's output. Return to Phaser 360 Topic List						Support Home Page Phaser 360 Support Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program