• Set the Timeout settings.

  Not Selected: Type a value of 0, or between 15 and 999, in this text box to change the number of seconds Windows waits before notifying you that a printer is off-line. The default is 15 seconds.

  Transmission Retry: On large or multiple-page documents you may see an Alert message that the printer is no longer accepting data before the job is completely sent to the printer. When using a shared printer, you should set this option to a larger value, such as 900 seconds (15 minutes) to avoid these unnecessary timeouts. Type a value between 45 and 999 in this text box; the default setting is 45 seconds. (If you are having timeout problems, also see Printer's timeout for information on setting the printer's timeout.)

---

Note: Use the Print Quality selections in the Device Options tab instead of the Resolution Options in the Graphics tab.

---

---

Note: If you are using host color correction, you need to make selections in the Graphics and Device Options tabs. Refer to the Phaser 350 On-line Reference Guide for more information on host color correction.

---

• The PostScript header contains important PostScript information that must accompany each print job; it is not a banner page printed with each job. If an option is not selected, an error message is displayed on your computer screen and your job does not print. Click one of the following in the PostScript header field:

  Select Download header with each print job. This option downloads PostScript header information with each print job.

  Click the Send Header Now button to save the PostScript header information in the printer, then select the Assume header is downloaded and retained option. This option makes print files a little smaller and faster than the first option, but you need to click the Send Header Now button every time the printer is turned off or reset.

• Click the Advanced button to see more options. Select Use PostScript Level 2 features. Click OK when finished.

  ---

  Note: For faster printing, select Binary communications protocol under Data format.

  ---