---

Note: If you enable job pipelining, a mismatch can occur between the job currently printing and a status message displayed for a previous print job. The mismatch occurs when a print job already closed (but not completely printed) develops a problem and reports an error during a subsequent print job.

---

• Enable/disable job pipelining from a Macintosh

• Enable/disable job pipelining from a PC/workstation

1. See Installing the Macintosh utility files to install the printer's software.

2. Locate the Apple Printer Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.

3. In the Printer Selector dialog box, make the following selections:
   1. Under AppleTalk Zones, select your printer's zone location.

   2. Under Printers, select your Phaser 350 printer.

   3. Click Open Printer.

      A dialog box appears with the selected zone and printer name at the top.

4. From the File menu, select Send PostScript File. The Select the PostScript files to download dialog box appears.

5. Select the PhaserTools folder.

6. Select one of the job pipelining files in the list then click Add.
   • Use the Pipelining On file to turn on print job pipelining.

   • Use the Pipelining Off file to turn off print job pipelining.

7. Click Send to download the file to the printer.

8. At the prompt Save PostScript output as you are asked for a file name for saving printer output. Use the default name given in the edit box or type in a new name. (Printer output includes status messages generated by the printer reporting such conditions as out of paper.)

9. Click Save.

10. If no output is returned by the printer, the Apple Printer Utility displays a dialog box; click Continue.

    If output is returned by the printer, you won't see this dialog box; check your hard disk for the file created by the utility for the printer's output.

1. Follow the instructions in Installing the utility files to install the printer's software.

2. Locate the utility files in the PHSR350 subdirectory inside the PHSRTOOL directory created on your hard disk by the printer's installer.

3. Select one of the following files:
   • Use the PIPE_ON.PS file to turn on print job pipelining.

   • Use the PIPE_OFF.PS file to turn off print job pipelining.

4. Use one of the following methods to send the desired file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer. See Downloading files from a PC if you need instructions.

   • Workstation users: Send a file to the printer as you would any PostScript file.