• Testing HP-GL mode

• Testing PostScript mode

Send the HPGLTEST.PLT file to the printer after you send the HPGL.PS or AIS.PS file, to make sure the language change was made correctly.

1. Locate the utility files on the Phaser 350 printer's CD-ROM; refer to Installing the files for instructions.

2. Use one of the following methods to send the HPGLTEST.PLT file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)

   • Workstation users: Send the file to the printer as you would any utility file.

Send the PSTEST.PS file to the printer after you send the PSCRIPT.PS or AIS.PS file, to make sure the language change was made correctly.

1. Locate the utility files on the Phaser 350 printer's CD-ROM; refer to Installing the files for instructions.

2. Use one of the following methods to send the PSTEST.PS file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)

   • Workstation users: Send the file to the printer as you would any utility file.