• Installing the files

• Important preparations

• Printing the color sampler charts

---

Note: You can select color corrections from the printer's front panel. However, if you need to select color corrections with downloadable utility files, also install the Printer Utilities item in the Custom Install window. (You may need to use utility files if the printer is some distance away from you, or if you are not using one of the provided drivers.)

---

1. Insert either the printer's CD-ROM or the Phaser 350 Color Printer Installer for Windows Disk 1 into the appropriate drive on your computer.

2. Do one of the following depending on your computer system:

   Windows 95 and Windows NT 4.0:

   1. Click the Start icon in the taskbar on your screen. In the menu that appears, click Run.

   2. In the Run window, type in the drive for the CD-ROM or diskette, followed by the file name SETUP, and click OK. For example:
      D:SETUP

   Windows 3.1 and Windows NT 3.51:
   1. In the Program Manager, select Run from the File menu.

   2. At the Command Line, type in the drive for the CD-ROM or diskette, followed by the file name SETUP, and click OK. For example:
      D:SETUP

3. Click Next in the two introduction screens in the Installer.

4. In the Select Installation Type dialog box, select Custom Install and click Next.

5. In the Driver Installation dialog box, select a printer driver option if applicable, and click Next.

6. In the Custom Install: Select Utilities dialog box, select the Samplers option and the Printer Utilities option, and click Next and follow the prompts. Files are copied to your hard disk.

7. In the Finish Installation dialog box click Next.

   ---

   Note: Follow the instructions in the printer's user manual if you need to install
   and setup a printer driver.

   ---

8. Locate the files:
   • The color sampler chart files are in the SAMPLERS directory in the PHSRTOOL directory created on your hard disk by the printer's installer.

   • The color correction utility files are in the PHSR350 directory inside the PHSRTOOL directory.

To print from a provided (PPD-supported) driver:

1. Print a color chart with either the TekColor Vivid Color front panel selection, or the Vivid Color (VIVDCOLR.PS) utility file downloaded to the printer.

2. Print from an application with the driver's TekColor Vivid Color option selected.

1. Print a color chart with either the Vivid Color front panel selection, or the Vivid Color (VIVDCOLR.PS) utility file downloaded to the printer.

2. Print from an application with either the Vivid Color front panel selection, or the Vivid Color (VIVDCOLR.PS) utility file downloaded to the printer.

* Make sure to use the same color correction to print the chart and later to print the colors from
an application.

Printing the color sampler charts

1. See Installing the files to locate the color sampler charts.

2. Decide which color correction you need to use; see Important preparations for details.

   If you are selecting a color correction from the printer's front panel, use the TekColor Corrections menu.

   If you need to download a color correction utility file:

   • PC users: Use the DOS COPY command to send the file to the printer. See Downloading files from a PC if you need instructions.

   • Workstation users: Send a color correction file to the printer as you would any PostScript file.

3. Print a color sampler chart using one of the following methods:
   • PC users: Use the DOS COPY command to send the file to the printer. See Downloading files from a PC if you need instructions.

   • Workstation users: Send the file to the printer as you would any PostScript file.

4. Select colors within an application using the colors on the chart.

5. Print your document using one of the following methods:
   • If you are printing from a supported driver: Print your document using a supported printer driver (in Windows 95, Windows NT 4.0, or Windows 3.1) with the same color correction option selected in the driver that you used with a downloaded utility file or on the front panel to print the chart. Any other color correction selection in the driver can cause the colors to print differently.

   • If you are not using a supported driver: Print your document with the same downloaded utility file or front panel color correction you used to print the chart. Any other color correction selection can cause the colors to print differently.