Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.

Phaser 780


Changing the printer's EtherTalk/TokenTalk zone (optional)

There are two ways to change the printer's zone:

  • With a TCP/IP connection and a World Wide Web browser, you can use PhaserLink Printer Management Software; see Changing the printer's zone: PhaserLink Printer Management Software.
  • You can also change the printer's zone using PostScript utility files; see the README files on the printer's CD-ROM. The Macintosh README file is in the Network Utilities folder; the PC README file is in the UTILS directory.

Changing the printer's zone: PhaserLink Printer Management Software

  1. From the printer's home page, click Configuration; this displays the View and Configure Settings page.
  2. On the View and Configure Settings page, click View and Configure Interface Settings page.
  3. On the View and Configure Interface Settings page, click: View and Configure EtherTalk Settings, or View and Configure TokenTalk Settings.
  4. In the Zone field, enter the desired zone.

For more information on PhaserLink Printer Management Software, see PhaserLink Printer Management Software.


Return to Topic List

Support Home Page
Phaser 780 Support Page

Xerox Office Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program