Setting IPX
frame types from the front panel
|
Setting IPX frame types: Phaser 740 and Phaser 360 printer
NOTE
If you are attempting to perform any front panel procedure and you don't see the expected menu choices, the front panel may be locked. For information on how to unlock it, see
If the front panel is locked.
-
Enter the
Network Settings
menu:
-
Press
Menu; the front panel displays Help Pages.
-
Press
---->
or
<----
until the front panel displays Network Settings.
-
Press
Menu; the front panel displays TCP/IP.
-
Access the menu of frame types:
-
Press
---->
until the front panel displays NetWare.
-
Press
Menu; the front panel displays Enable Interface.
-
Press
---->; the front panel displays IPX Frame Type.
-
Press
Menu; the front panel displays the first in a menu of frame types.
-
Enable or disable the frame type:
-
Press
---->
until the frame type you want is displayed.
-
Press
Menu
to display the current status of the frame type: Enabled or Disabled.
-
Press
---->
until the frame type is either Enabled or Disabled, as desired.
-
Press
OK
to enter your choice into the printer. The front panel briefly displays Selected, then returns to the display of the frame type name.
-
You can set more than one frame type; to set other frame types, repeat Step
3.
-
Return the printer to normal operation:
-
Press
(
Exit
) until the front panel displays Network Settings.
-
Press
(
Exit
) again.
-
If you have changed any parameters that require a printer reset to take effect, you are prompted to reset the printer. If you press
Reset, the printer resets. If you press
Resume, the front panel displays Network Settings. Press
(
Exit
); the printer returns to normal operation, but the changes you have made do take effect until the next time the printer is reset.
-
If you have not changed any parameters that require a printer reset to take effect, the front panel displays Ready.
Return to Topic List
|
| |
|