You can enable and disable printing of the startup page in several ways:

• Enabling and disabling the startup page from the front panel

• Enabling and disabling the startup page with a downloadable utility file

• Enabling and disabling the startup page with PhaserLink software

1. While the Ready message is displayed, press the Menu button. The printer displays the first item in the setup menu:
   Help Pages
   <---- ----> Menu

2. Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selections until the following message appears:
   Printer Defaults
   <---- ----> Menu

3. Press the Menu button to access the printer defaults settings.

4. Using the left arrow (<----) or right arrow (---->) buttons, scroll through the selections until the following message appears:
   Startup Page
   <---- ----> Menu

5. Press the Menu button to access the startup page settings.

6. Press the right arrow (---->) button once for the following message:
   Startup Page:Off
   <---- ----> Select

7. Press the Select button to disable printing of the startup page.

8. To return to the top level of the menu, press the button until the printer displays the Ready message.

• Macintosh utility file: LaserWriter Utility

• PC utility file: STARTPG.PS/NOSTRTPG.PS

1. Install the utility files from the Phaser 600 printer's CD-ROM; see Macintosh software for instructions.

2. Select the appropriate printer in the Chooser.

3. Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and double-click its icon to start the application.

4. Choose Set Startup Page from the Utilities menu.

5. Select either the on or off button, then click OK.

1. Follow the instructions in PC/Windows software to install the printer's software. Select Easy Install to automatically install the software, or select the Printer Utilities item in the Custom Install: Utilities window.

2. Locate the files in the PHSR600 subdirectory, inside the PHSRTOOL directory created on your hard disk by the installer application.

3. Select one of the following files:
   • Use the STARTPG.PS file to enable printing of the printer's startup page.

   • Use the NOSTRTPG.PS file to disable the printer's startup page.

4. Use one of the following methods to send the desired file to the printer:
   • PC users: Use the DOS COPY command to send the file to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)

   • Workstation users: Send a file to the printer as you would any PostScript file.

Printer Types | Topics