Note: If you are using QuickDraw GX, you can use the Xerox Phaser 600 GX driver to
print a copy of the configuration page.
Install the utility files from the Phaser 600 printer's CD-ROM; see Macintosh software for instructions.
Select the appropriate printer in the Chooser.
Locate the LaserWriter Utility in the PhaserTools folder on your hard disk, and double-click itsicon to start the application.
Choose Download PostScript File from the Utilities menu.
Select the Configuration Page file from the list, then click Open. (This file was installed in the Printer Utilities folder, inside the PhaserTools folder.)
At the prompt Save PostScript output as: you are asked for a file name for saving printer output. Use either the default name given in the edit box or type a new name.
Click Save to send the file to the printer.
If no output is returned by the printer, the LaserWriter Utility displays a dialog box; click OK to continue.
Follow the instructions in PC/Windows software to install the printer's software. Select Easy Install to automatically install the software, or select the Printer Utilities item in the Custom Install: Utilities window.
Locate the files in the PHSR600 subdirectory, inside the PHSRTOOL directory created on your hard disk by the installer application.
Use one of the following methods to send the PRNTCNFG.PS file to the printer:
PC users: Use the DOS COPY command to send the file to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)
Workstation users: Send the file to the printer as you would any PostScript file.
