|
Setting up the printer
|
|
The color sampler charts print Letter-size pages 2-up on B-size (tabloid) paper. You can print each color sampler chart on separate sheets of B-size paper, or on a continuous sheet of roll paper to create a wall chart. You can also cut each Letter-size page for placement in a binder for easy reference.
Click on the following topics for setup instructions:
If you are using manual feed media
- Use B-size (tabloid) sheets of paper for the most efficient use of paper.
- Select Media Size: ANSI B on the printer's front panel.
- Remove roll media from the input slot.
- Feed individual sheets into the media input slot at the front panel prompt.
- Do not feed subsequent sheets until the previous print has completed.
If you are using roll media
- Use roll paper that is at least 12 inches wide. The narrower the roll, the less paper is wasted.
- Select Media Size: ANSI B on the printer's front panel.
- If you want the charts to print in a continuous banner, select Media Cutting: per Job on the printer's front panel.
- You may want to set page rotation to 90-degrees to save paper. To make this selection, use the printer utility files shipped with the printer.
Printer Types | Topics
|
| |
|
