|
IPP Settings Help
Internet Printing Protocol (IPP) is the industry standard network printing protocol.
IPP - Allows you to enable and disable the port.
Network Path - The printer's URL.
Page Description Language - Select the language you want the printer to receive on the
IPP port. If you select
AutoSelect, the printer automatically detects the language of the print job and processes it accordingly.
Filtering - This field allows you to select whether or not the printer strips out control characters. Options are
InterpreterBased or
None. In most cases,
Filtering should be set to
None.
Authentication Scheme - This field allows you to choose which type of authentication scheme to use when printing with
IPP. These schemes are only used if the printer has both a user name and password entered for
IPP.
-
basic - This scheme requires the printer to authenticate the person sending the print job. The printer only services the request if the name and password provided by the user match the values stored in the printer.
-
digest - This scheme requires the printer to authenticate the person sending the print job using a single checksum password scheme. The printer only services the request if the name and password provided by the user match the values stored in the printer.
Note: These options comply with
IETF standard
RFC's for basic and digest authentication, but not all
IPP clients support these authentication methods.
User Name - Enter the user name for the printer. This field can contain a maximum of
10 characters.
Password/Verify Password - Enter the printer password and verify. This field can contain a maximum of
10 characters.
|
