Printer management: the View and Configure Settings page

Skip to main content Click to view our Accessibility Statement or contact us with accessibility-related questions.

PhaserShare

Reset Printer Parameters (Phaser 380, 350, 340, 560, 550, 600 printers only)

Clicking the Do/Apply button on this page resets the printer, which sets most printer parameters to the values currently stored in the printer's internal memory. The effect is the same as turning the printer off, then on again. If a validation password has been assigned, you must enter the password for the change to take effect.

For best results, follow these steps when resetting the printer from this page:

From the printer's home page, click the Configuration button; this displays the View and Configure Settings page.
On the View and Configure Settings page, click the link Reset Printer Parameters.
If a password is required, enter it.

Note: PhaserLink passwords are not encrypted.
Click the Do/Apply button.
Wait 10 seconds, then click the browser's Stop button.
Reload the page in the browser.

Return to PhaserLink Help Home Page

Support Home Page

Network Printers Support Home

Additional Information

			Register your Printer
			ASPs & TPMs
			About Software Support
			Color Connection
			Printer Warranties
			Material Safety Data Sheets
			Supplies & Cartridge Recycling Program