View and Configure SNMP Settings

Function	Description
System Name	This field allows you to specify the printer's name. This parameter can also be set from the View and Configure Email Notification page and the View and Configure PhaserLink Printing Settings page.
System Contact	This field allows you to specify the name of the contact person for printer problems. This parameter can also be set from the View and Configure Email Notification page and the View and Configure PhaserLink Printing Settings page.
System Location	This field allows you to specify the printer's location. This parameter can also be set from the View and Configure Email Notification page and the View and Configure PhaserLink Printing Settings page.
Trap Host(s)	Phaser 360 printers: This field allows you to specify the IP or IPX addresses of the members of the trap host list. The addresses must be specified as follows: IP addresses must be preceded by a 1: 1xxx.xxx.xxx.xxx IPX addresses must be preceded by a 0: 0xxxxxxxxyyyyyyyyyyyy In IPX addresses, xxxxxxxx is the hexadecimal network address and yyyyyyyyyyyy is the hexadecimal node address. Phaser 380, 350, 340, 560, 550, and 600 printers: This field allows you to specify the IP addresses of the members of the trap host list. Members of the trap host list receive asynchronous SNMP traps (error and status messages) from the printer. Multiple hosts can be specified by separating the addresses with a space.
Authentication Failure Enabled	Enable this if you want to be notified if unauthorized users attempt to set SNMP variables.