View and Configure FTP Settings

Function	Description
FTP Enabled (Phaser 360) Port Enabled (Phaser 380, 350, 340, 560, 550, 600 printers)	This field allows you to enable and disable the protocol.
Login password	Use the field to specify a password to be used when logging in to the printer. For the Phaser 360, the maximum length for the password is 32 characters; for other printers, the maximum is 47 characters.
Language	Select the language you want the printer to receive on the FTP port; the choices are listed here (not all printers support all languages): AutoSelect HP-GL PCL PostScript If you select AutoSelect, the printer automatically senses the language of the print job and processes it accordingly; this is called automatic language selection. Refer to your printer's user manual for more information about automatic language selection and which languages the printer supports.
Filtering	This field allows you to choose whether the printer strips out control characters. The choices are InterpreterBased or None. In most cases, Filtering should be set to None.
Delayed Output Close	When you choose True (On), the printer does not begin a new job on this port until the current job is completed. When you choose False (Off), the printer can begin processing a new job while it is still printing a previous job. For Phaser 380, 350, 340, 560, 550, 600 printers: If Delayed Output Close is False (Off), job accounting is disabled for the FTP protocol.