---

Note: It is important that LPRPORTD.EXE and LPD.EXE be running in the background. You can set these to run automatically from the Autostart tab of the TCP/IP Configuration dialog box.

---

1. Create a Printer Object. To do this, use the right mouse button to drag the Printer template from the Templates folder; this displays the Create a Printer dialog box.

2. In the Create Printer dialog box, enter the name of the printer.

3. If the driver is already installed, select the appropriate driver; if the driver is not installed, you must install it:
   1. Click on Install new printer driver; this displays the Install new printer driver dialog box.

   2. In the Printer Driver Selection section, select Other OS/2 printer driver, then specify the path to the driver. For example:
      d:os2drv

      Click the Refresh button, then select the new driver from the list. Click the Install button and follow the on-screen prompts.

4. Click the right mouse button on an available Pipe port (0 through 7) and select Settings from the menu; the Settings dialog box is displayed. If ports are not selectable or are unavailable, follow these steps:
   1. Select Install Ports from Settings and enter C:TCPIPDLL where appropriate. You will only have to do this if no printers were specified when TCP/IP was installed.

   2. This is where the ports that were not available can be selected: Lpt1-3, Com 1-4, and Pipe 0-7.

   3. Once ports are installed, select a Pipe, such as Pipe 1, then double-click this port.

5. In the Print Destination section, make the following entries:
   • LPD server. The printer's IP address.

   • LPD printer. The printer's name. The printer's name should be either PS or AUTO in upper case letters. It is recommended that you leave everything else blank.

     Click OK to return to the Create Printer dialog box, then click the Create button.

6. Set the printer as your default printer:
   1. Click the right mouse button on the printer object.

   2. Click on Set default, then select the new printer object.