Printers & Supplies
Solutions & Services
Customer Support
Partners
Bindery mode and NDS (NetWare Directory Services) supported The printer's NetWare interface supports Bindery and NDS connection modes. The Phaser 360 printer supports Bindery and NDS modes separately or simultaneously.
Bindery reference queues supported The Phaser 380, 350, 340, 560, 550, 540, and 600 printers support bindery reference queues. With these printers, the print server name and password on the bindery server must be the same as directory services names.
With the Phaser 360 printer, bindery reference queues are not necessary because this printer supports simultaneous Bindery and NDS connections.
Supported NetWare versions The printer's NetWare interface has been tested with NetWare versions 3.12, 4.1, and 4.11. It should work with any NetWare server that uses NetWare's QMS (Queue Management System) to manage and service print queues. These servers include 80286, 80386, and 80486-based servers running other versions of NetWare (for example, versions 2.15, 2.2, 3.0, 3.11, 4.0), DOS and OS/2-based systems, VMS servers, and servers running UnixWare. PhaserShare Series B NetWare interface is not compatible with systems running NetWare Lite.
Supported NetWare protocols The printer's NetWare interface supports the following NetWare protocols:
IPX (Internet Packet Exchange)
SPX (Sequential Packet Exchange)
SAP (Service Advertising Protocol)
RIP (Router Information Protocol)
NEST (Novell Embedded Systems Technology)
SNMP (Simple Network Management Protocol)
Note: The printer's NetWare interface supports packet signature and IPX checksum automatically, that is, the print server automatically signs packets and/or calculates checksums upon request from the file server. Passwords If a password is used in Bindery mode, it must be set on the printer with the PhaserShare Administrator (or PhaserLink software) and on the file server with PCONSOLE.
Note: The printer's NetWare interface supports packet signature and IPX checksum automatically, that is, the print server automatically signs packets and/or calculates checksums upon request from the file server.
If a password is used in NDS mode, it must be set on the printer with the PhaserShare Administrator (or PhaserLink software) and on the file server with the NWAdmin utility or PCONSOLE.
Notify lists Use the PhaserShare Administrator to set up notify lists on NetWare 3.x servers. On NetWare 4.1, use the NWAdmin utility to setup the notify list for a printer.
