---

Note: If you are attempting to perform any front panel procedure and you don't see the expected menu choices on the front panel display, the front panel may be locked. For information on how to unlock it, see If the front panel is locked.

---

1. Enter the Network Settings menu.
   1. Press the Menu button; the front panel displays Help Pages.

      ---

      Note: When you are in the menu, if the front panel is not used for 5 minutes, the printer returns to the Ready state.

      ---

   2. Press the right (---->) or left (<----) arrow buttons until the front panel displays Network Settings.

   3. Press the Menu button; the front panel displays TCP/IP.

2. Access the menu of frame types.
   1. Press the right arrow button (---->) until the front panel displays NetWare.

   2. Press the Menu button; the front panel displays Enable Interface.

   3. Press the right arrow button (---->); the front panel displays IPX Frame Type.

   4. Press the Menu button; the front panel displays the first in a menu of frame types.

3. Enable or disable the frame type.
   1. Press the right arrow button (---->) until the frame type you want is displayed.

   2. Press the Menu button to display the current status of the frame type: Enabled or Disabled.

   3. Press the right arrow button (---->) until the frame type is either Enabled or Disabled, as desired.

   4. Press the OK button to enter your choice into the printer. The front panel briefly displays Selected, then returns to the display of the frame type name.

4. You can set more than one frame type; to set other frame types, repeat Step 3.

5. Return the printer to normal operation.
   1. Press the Exit button until the front panel displays Network Settings.

   2. Press the Exit button again.
      • If you have changed any parameters that require a printer reset to take effect, you will be prompted to reset the printer. If you press the Reset button, the printer resets. If you press the Resume button, the front panel displays Network Settings. Press the Exit button; the printer returns to normal operation, but the changes you have made will not take effect until the next time the printer is reset.

      • If you have not changed any parameters that require a printer reset to take effect, the front panel displays Ready.