PhaserShare

FTP Interface Your printer's FTP interface is a standard FTP server. Using FTP, you can send a job to the printer, where it is printed (not stored). No password is required. You can save a PostScript file from an application and send the file to a remote printer over a network or the Internet using an FTP program. The printer's FTP directory is PRINTER:1, and any files sent there are automatically passed to the printer. The printer's FTP parameters can be changed using PhaserLink software. For more information on PhaserLink software, see PhaserLink Software: the Printer's Information Link. The following table lists the supported FTP commands. PhaserShare supported FTP commands Request Description ABOR Abort previous command. HELP Give help information. MODE Specify data transfer mode. NOTE: With the PhaserShare FTP interface, the only transfer mode is Stream. NOOP Do nothing. PASS Specify password. PASV Get the server's IP address and port number. PORT Specify data connection port. PUT Send a file to the printer. PWD Print the current working directory. QUIT Terminate session. STAT Report current status. NOTE: With the PhaserShare FTP interface, optional arguments to this command are ignored. STOR Store a file. STRU Specify a data transfer structure. NOTE: With the PhaserShare FTP interface, only File and Record structures are allowed; the default is File. SYST Specify operating system of server. TYPE Specify data transfer type. NOTE: With the PhaserShare FTP interface, only ASCII Non-printing and Image types are allowed; the default is ASCII Non-printing. USER Specify user name. Return to Networking Topic List						Support Home Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program