Skip to main contentClick to view our Accessibility Statement or contact us with accessibility-related questions.
PhaserShare


Disabling protocols: Phaser 600 printer
  1. Press the Menu button; the front panel displays Help Pages.

    Note: When you are in the menu, if the front panel is not used for 5 minutes, the printer returns to the Ready state.
  2. Enter the Network Settings menu by pressing the right (---->) or left (<----) arrow buttons until the front panel displays Network Settings.

  3. Press the Menu button; the front panel displays TCP/IP.

  4. Disabling TCP/IP:

    1. Press the Menu button; the front panel displays Enable Interface.

    2. Press the Menu button again to display the current status of the protocol: Enable Interface:On or Enable Interface:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays Enable Interface:Off.

    4. Press the Select button to disable the protocol; the front panel briefly displays Selected, then it returns to the Enable Interface display.

    5. Press the Exit button until the front panel again displays TCP/IP.

  5. Disabling EtherTalk: To return the printer to normal operation, go immediately to Step 8; to continue on and disable the EtherTalk protocol, follow these steps:

    1. With the front panel displaying TCP/IP, press the right arrow (---->) button until the front panel displays EtherTalk.

    2. Press the Menu button; the front panel displays the current status of the protocol: EtherTalk:On or EtherTalk:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays EtherTalk:Off.

    4. Press the Select button to disable the protocol; the front panel briefly displays Selected, then it returns to the EtherTalk:Off display.

    5. Press the Exit button until the front panel again displays EtherTalk.

  6. Disabling NetWare: To return the printer to normal operation, go immediately to Step 8; to continue on and disable the NetWare protocol, follow these steps:

    1. With the front panel displaying EtherTalk, press the right arrow (---->) button until the front panel displays NetWare.

    2. Press the Menu button; the front panel displays the current status of the protocol: NetWare:On or NetWare:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays NetWare:Off.

    4. Press the Select button to disable the protocol; the front panel briefly displays Selected, then it returns to the NetWare:Off display.

    5. Press the Exit button until the front panel again displays NetWare.

  7. Disabling HTTP: To return the printer to normal operation, go immediately to Step 8; to continue on and disable the HTTP protocol, follow these steps:

    1. With the front panel displaying NetWare, press the right arrow (---->) button until the front panel displays HTTP.

    2. Press the Menu button; the front panel displays the current status of the protocol: HTTP:On or HTTP:Off. The current status is marked with an asterisk (*) in the upper-right corner of the display.

    3. Press the right arrow (---->) button until the front panel displays HTTP:Off.

    4. Press the Select button to disable the protocol; the front panel briefly displays Selected, then it returns to the HTTP:Off display.

    5. Press the Exit button until the front panel again displays HTTP.

  8. To return the printer to normal operation, press the Exit button until the front panel displays Ready.

Return to Networking Topic List
Support Home Page
Network Printers Support Home
Additional Information

Register your Printer
ASPs & TPMs
About Software Support
Color Connection
Printer Warranties
Material Safety Data Sheets
Supplies & Cartridge Recycling Program