One of the ink-loading bins is low. Check to see which color is low and load ink.
Caution: Use ink made for the Phaser 8500/8550 Color Printer only. Use of ink made for other Xerox printers or the use of non-Xerox ink may result in permanent damage to the printhead and affect print quality.
To load ink:
Remove paper from the
output tray.
Open the top cover.
Locate the ink-loading
bin that is almost empty. A label above each bin indicates the color and
color number of that bin.
Note: Each
ink stick has a number that corresponds to the number on the ink-loading
bin.
Remove the ink stick from its packaging.
Place the ink stick into
the opening of the appropriate ink-loading bin. Each ink stick is uniquely
shaped to fit into the correct ink-loading bin. Do not force the ink stick
into the ink-loading bin.
Close the top cover.
To order ink, contact your local reseller or go to the Phaser
Note: If the printer is out of cyan, magenta, or yellow ink, you can continue to print using only black ink for a limited time. Follow these instructions for your printer driver:
Cancel the current printer job by pressing the Cancel button on the control panel.
Set the driver to print in black and white.
In the Windows PostScript driver, select the TekColor tab, and then select Black & White.
In the Mac OS X (version 10.2 and higher) Print dialog box, select Image Quality from the drop-down list, and then select Black and White from the Color Correction drop-down list.
Send the print job to the printer.