Usage profile full report - some fields not supported by all printers
Field number
|
Field name
|
Description
|
1
|
Date of Report
|
The date and time that the report was generated.
|
2
|
Time Stamp
|
The date and time that the printer was first turned on.
|
3
|
Network IDs
|
Serial Number, Ethernet Address, IP Address, Check Code. Check code is included only on email reports, not on printed reports.
|
4
|
Printer Name
|
The printer's name as it appears on the Configuration Page.
|
5
|
Printer Type
|
The printer type as it appears on the Configuration Page.
|
6
|
Printer Class
|
Laser or Solid Ink.
|
7
|
Adobe Firmware
|
PostScript version number.
|
8
|
Engine Firmware
|
Print engine firmware version number.
|
9
|
PS Firmware
|
PS region firmware number.
|
10
|
Net Firmware
|
Network region firmware number.
|
11
|
OS Firmware
|
OS region firmware number.
|
12
|
RAM (MBs)
|
The number of megabytes of printer RAM.
|
13
|
Installed Trays
|
The number of trays installed, including the multi-purpose tray.
|
14
|
Accessories
|
A list of all accessories installed in the printer: Duplexer, Scanner, IDE Disk, and SCSI Disk.
|
101
|
Report Intervals
|
Page and time intervals specified in the PhaserLink
View and Configure Status Notification (Email Notification) Settings
page.
|
102
|
Images
|
Number of sides printed (a single-sided print is 1 image; a duplex print is 2 images). This item includes two values. The first indicates the total number of sides for which Usage Profile logging has occurred; the second indicates the total number of sides printed.
|
103
|
Planes
|
For all images, the number of colors used (cyan, magenta, yellow, black).
|
111
|
Pixels imaged (1K)
|
The total number of pixels printed for each color. Values are given in K (1024) for Black, Yellow, Magenta, and Cyan, rounded to the nearest K.
|
112
|
Average Coverage (%)
|
The average coverage per page for all images. For the Phaser 740, coverage is based on letter-size pages, so a legal-size page with full coverage shows more than 100%. For other printers, coverage takes media size into account.
|
113
|
Pixels Imaged-Paper (1K)
|
The number of pixels printed on paper for each color. Values are given in K (1024) for Black, Yellow, Magenta, and Cyan, rounded to the nearest K.
|
114
|
Average Coverage-Paper (%)
|
The average coverage per page for all images on paper. For the Phaser 740, coverage is based on letter-size pages, so a legal-size page with full coverage shows more than 100%. For other printers, coverage takes media size into account.
|
115
|
Pixels Imaged-transparency (1K)
|
The number of pixels printed on transparencies for each color. Values are given in K (1024) for Black, Yellow, Magenta, and Cyan, rounded to the nearest K.
|
116
|
Average Coverage-transparency (%)
|
The average coverage per page for all images on transparencies.
|
121
|
Days printed
|
The number of calendar days that the printer was turned on. If the printer was turned on for any amount of time during a day, that day is counted.
|
122
|
Pages / Day
|
A distribution of the number of pages printed for each day the printer was on, showing how much activity the printer had.
A set of number pairs in the format
page-count range
:
number of days. For example,
2-4:3
indicates that there were 3 days in which 2, 3, or 4 pages were printed.
|
123
|
Unique Pages / Job
|
A distribution of the sizes of jobs.
A set of number pairs in the format
unique-page-count range
:
number of jobs. For example,
2-4:3
indicates that there were 3 jobs that consisted of 2, 3, or 4 unique pages (sides).
|
124
|
Copies / Job
|
A distribution of how many copies were printed for each job.
A set of number pairs in the format
copy-count range
:
number of jobs. For example,
2-4:3
indicates that there were 3 jobs that consisted of 2, 3, or 4 copies.
|
125
|
Minutes / Job
|
A distribution of how long each job took to print.
A set of number pairs in the format
minutes-range
:
number of jobs. For example,
2-4:3
indicates that there were 3 jobs that took 2, 3, or 4 minutes to print.
|
131
|
Job Source
|
A set of value pairs in the format
job-source
:
number of jobs. For example,
EtherTalk:3
indicates that there were 3 jobs printed over EtherTalk.
|
132
|
Job Language
|
A set of value pairs in the format
job-language
:
number of jobs. For example,
PostScript:3
indicates that there were 3 PostScript jobs printed.
|
133
|
Jobs Collated
|
A set of value pairs in the format
No :
number of jobs
,Yes :
number of jobs. For example, No:5,Yes:3 indicates that 5 non-collated jobs were printed and 3 collated jobs were printed.
|
134
|
Cancelled jobs
|
The number of jobs that were cancelled.
|
135
|
Cancelled jobs (%)
|
The percentage of total jobs that were cancelled.
|
136
|
Total jobs
|
The total number of jobs that were printed.
|
141
|
Duplex Prints (pages)
|
A set of value pairs in the format
Simplex :
number of jobs
,Duplex :
number of jobs. For example, Simplex:5,Duplex3 indicates that 5 jobs single-sided jobs were printed and 3 double-sided jobs were printed.
|
142
|
Output Order (pages)
|
A set of value pairs in the format
Face Down :
number of jobs
,Face Up :
number of jobs. For example,
Face Down:5,Face Up:3
indicates that 5 jobs were printed face down and 3 jobs were printed face up.
|
143
|
Color Prints (pages)
|
A distribution of color vs. monochrome pages.
|
144
|
Print Quality (pages)
|
A distribution of images for all print qualities.
|
145
|
Color Correction (pages)
|
A distribution of images for all color correction modes.
|
151
|
Multi-Purpose Tray Media
|
A distribution of images for all possible media size and type combinations from the Multi-Purpose tray as much as the user has identified them via the front panel.
|
152
|
Cassette Media
|
A distribution of images for all possible media size and type combinations from the cassettes.
|
159
|
Maintenance Kit Remaining (%)
|
The percentage of life remaining for the maintenance kit.
|
160
|
Maintenance Kit Remaining (pages)
|
The remaining life of the maintenance kit expressed as the number of pages that can still be printed.
|
161
|
Toner Status
|
For each toner supply, the status will be shown as
OK,
Low,
Replace, or
Not Installed
just as on the Consumables Page.
|
162
|
Fuser Remaining (%)
|
The percentage of life remaining in the fuser unit.
|
163
|
Imaging Unit Remaining (%)
|
The percentage of life remaining in the imaging unit.
|
164
|
Transfer Kit Remaining (%)
|
The percentage of life remaining in the transfer kit unit.
|
165
|
Fuser Roll Remaining (%)
|
The percentage of life remaining in the fuser roll unit.
|
166
|
Main Charge Grid Remaining
|
The percentage of life remaining for the main charge grid.
|
167
|
Waste Toner Status (%)
|
Waste toner bin usage expressed as a percentage of the life of the unit.
|
171
|
Doors Open
|
For each access door, the number of times it has been opened.
|
172
|
Consumables Replaced
|
A distribution of the conditions at which each consumable has been replaced, whether it was low or out or neither (i.e. at the user's discretion), or some other condition detected by the printer.
|
173
|
Paper Out
|
For each tray, the number of times it has been emptied. This includes the number of times the tray has been pulled out as well as the number of times the the tray has been emptied by printing all the media in the tray.
|
174
|
Button Presses
|
The number of times any of the front panel buttons has been pressed.
|
175
|
Feature
|
A distribution of how many times the user has accessed front panel menu settings or printed internal help pages.
|
181
|
Power On Count
|
The number of times the power has been switched on.
|
182
|
Total On Time (hrs)
|
Total time the printer has been on, in hours.
|
183
|
Latest On Time (hrs)
|
Time the printer has been on since just the last time it was switched on.
|
184
|
EStar Time (hrs)
|
Total time the printer has been in Energy Star mode, in hours.
|
185
|
EStar Time Distribution (mins)
|
A distribution of the time the printer has spent in Energy Star mode. For example: 15-29:5 indicates that there were 5 periods of Energy Star lasting between 15 and 29 minutes.
|
186
|
Warmup Time (hrs)
|
Total time the printer has been in the warmup state, in hours.
|
187
|
Offline Time (hrs)
|
Total time the printer has been unavailable for printing, in hours.
|
188
|
JetStack Standby Time (hrs)
|
Total time the printer has been in JetStack Standby mode, in hours.
|
189
|
JetStack Standby Time Distribution (hrs)
|
A distribution of the time the printer has spent in JetStack Standby mode. For example: 15-29:5 indicates that there were 5 periods of JetStack Standby lasting between 15 and 29 hours.
|
191
|
Temperature (C)
|
A distribution of hourly temperature readings. For example: <=10:2 indicates that the engine temperature was less than or equal to 10 degrees Celsius for 2 hours. The temperature is normally read at the beginning of each hour, however, if the printer is off and turned on in a new hour, the temperature is read immediately.
|
192
|
Humidity (%)
|
A distribution of hourly humidity readings. For example: 16-35:43 indicates that the engine temperature was between 16 and 35 percent for 43 hours. The humidity is normally read at the beginning of each hour, however, if the printer is off and turned on in a new hour, the humidity is read immediately.
|
201
|
System Reset Count
|
Number of times the system has been reset by some internal condition.
|
202
|
System Reset Log
|
Log of the last 5 system reset addresses. (Zero indicates no event.)
|
203
|
System Reset Page#
|
Corresponding page numbers at which the last 5 system resets occurred.
|
204
|
Engine Error Log
|
Log of the last 10 engine error codes--see
Logs. (Zero indicates no event.)
|
205
|
Engine Error Page#
|
Corresponding page numbers at which the last 10 engine errors occurred.
|
206
|
PostScript Error Log
|
Log of the last 5 PostScript error codes--see
Logs. (Zero indicates no event.)
|
207
|
PostScript Error Page#
|
Corresponding page numbers at which the last 5 PostScript errors occurred.
|
211
|
Jam A (Upper Tray; Phaser 840, 740)
Jam AB (Phaser 780)
|
A distribution of jams for all media size and type combinations through the upper tray.
A distribution of jams for all media size and type combinations.
|
212
|
Jam B (Middle/Lower Trays)
|
A distribution of jams for all media size and type combinations through the middle and lower trays.
|
213
|
Jam C (Exit Cover; Phaser 840)
Jam C (Fuser; Phaser 740)
Jam CD (Phaser 780)
|
A distribution of jams for all possible media size and type combinations, as much as the user has identified them via the front panel.
|
214
|
Jam D (Front Cover; Phaser 840)
Jam D (Flip; Phaser 740)
|
A distribution of jams for all possible media size and type combinations, as much as the user has identified them via the front panel.
|
215
|
Jam E (Exit Cover; Phaser 840)
Jam E (Exit; Phaser 740)
Jam E (Phaser 780)
|
A distribution of jams for all possible media size and type combinations, as much as the user has identified them via the front panel.
|
216
|
Jam F (Duplex)
|
A distribution of jams for all possible media size and type combinations, as much as the user has identified them via the front panel.
|
217
|
Jam Manual Feed
(Phaser 840)
Jam Multi-Purpose Tray
(Phaser 740, 780)
|
A distribution of jams for all possible media size and type combinations through Manual Feed, as much as the user has identified them via the front panel.
A distribution of jams for all possible media size and type combinations through the Multi-purpose tray, as much as the user has identified them via the front panel.
|
221
|
Last Jam Location
|
Log of the last 5 jam locations--see
Logs. (Zero indicates no event.)
|
222
|
Last Jam Media
|
Log of the last 5 jam media--see
Logs. (Zero indicates no event.)
|
223
|
Last Jam Page #
|
Corresponding page numbers at which the last five jams occurred.
|
224
|
Print Head Clean Date Log
|
Log of the dates and times of the last five print head cleanings.
|
225
|
Print Head Clean Page #
|
Corresponding page numbers at which the last five print head cleanings occurred.
|