Printer Error - Transfer Unit

There is a problem with the transfer unit.

  1. Open the top cover.

    Graphic illustrates this step.

  2. Remove all four imaging units.

    Graphic illustrates this step.

  3. Remove the transfer unit.

    Graphic illustrates this step.

  4. Turn off the printer.

    Graphic illustrates this step.

  5. Wait at least 10 seconds, and then turn on the printer.

    Graphic illustrates this step.

  6. Reinstall the transfer unit.

    Graphic illustrates this step.

  7. Reinstall the four imaging units.

    Graphic illustrates this step.

  8. Slowly close the top cover.

    Graphic illustrates this step.

  9. If problem persists, press the Help (?) button on the control panel, record the error code number, and call Technical Support or access PhaserSMART®.