Place the printer on a level surface with no more than 3 degree tilt in any direction, equivalent to raising one corner of the printer approximately 2 cm (0.75 in.).

---

Caution: Tilting the printer more than 3 degrees causes drum fluid to leak from the maintenance tray resulting in damage to your printer not covered by the printer's warranty.

---

Operating: 10 deg. C to 32 deg. C (50 deg. F to 95 deg. F)
Nonoperating: -30 deg. C to +60 deg. C (-22 deg. F to 140 deg. F)
Storage: -30 deg. C to +60 deg. C (-22 deg. F to 140 deg. F)

Humidity

Operating: 10% to 80% Relative Humidity, noncondensing
Nonoperating: 10% to 95% Relative Humidity, noncondensing

Altitude

Operating: 0 to 2,400 meters (0 to 8,000 feet)
Nonoperating: 0 to 15,000 meters (0 to 50,000 feet)

Primary voltage ranges

87 - 128 VAC, 115 VAC nominal

174 - 250 VAC, 220 VAC nominal

Frequency range

48 to 66 Hz

AC input ratings

115 VAC, 10 Amps

220 VAC, 5 Amps

Print quality and speed*

Fast Color mode color print on paper: 6 pages per minute

Fast Color mode color print on transparency: 5.5 pages per minute

Standard mode color print on paper: 4 pages per minute

Standard mode color print on transparency: 2 pages per minute

Enhanced mode 800 x 450 dpi color print on paper: 2 pages per minute

Enhanced mode 600 x 300 dpi color print on transparency: 2 pages per minute

* Left and right margins set to 7.4 mm (0.3 in.) or larger.

Power consumption

Operating power consumption: 140 to 480 Watts
Meets Energy Star power conservation requirements
with the Energy Star timeout set to one hour.

Printer Dimensions

Height: 33 cm (13 in.) Depth: 50.2 cm (19.75 in.)

Width: 40 cm (15.75 in.) Weight: 32 kg (70 lb.)

Printer Clearances

Top: 45.7 cm (18 in.) Sides: 10.2 cm (4 in.)

Front: no restrictions Rear: 10.2 cm (4 in.)

Bottom: no restrictions

Lower Paper Tray Assembly Dimensions

Height: 13.0 cm (5.13 in.) Depth: 50.8 cm (20 in.)

Width: 40 cm (15.75 in.) Weight: 7 kg (15.5 lb.)