Phaser 360

Interface cables and adapters The following cables and adapters are available through Tektronix or your dealer. Contact your dealer for other cables and adapters. Description Connectors and cable length Order number Parallel cable Connects the printer's parallel port to a PC or workstation parallel port. 36-pin high-density plug to 25-pin DSUB plug; 3 meters (9.84 feet) 012-1468-00 Parallel/Centronics adapter Adapts your system's existing low-density, Centronics parallel cable connector to the printer's high-density parallel connector. parallel adapter: converts 36-pin low-density 1284-B plug to 36-pin high-density 1284-C plug 013-0299-00 SCSI-2 HD to SCSI-1 LD cable Connects the printer's SCSI port to a hard disk drive. 50-pin high-density plug to 50-pin low-density plug; 2.0 meters (6.56 feet) 012-1432-00 SCSI-1 LD to Macintosh SCSI cable Combine with 013-0297-00 to connect the printer's SCSI port to a hard disk drive with Macintosh SCSI 25-pin plug. 50-pin low-density plug to Macintosh SCSI 25-pin plug 012-1299-00 SCSI-1 LD to SCSI-2 HD adapter Use with either 012-1465-00 or 012-1299-00 to convert a low-density SCSI connection to a high-density SCSI connection. SCSI adapter: converts 50-pin low-density plug to 50-pin high-density plug 013-0297-00 Return to Phaser 360 Topic List						Support Home Page Phaser 360 Support Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program