Phaser 360

Using isopropyl alcohol Some of the cleaning procedures require isopropyl alcohol (IPA). Use the purest IPA (99%) available. You can use 90% pure IPA, but if you do, you must wait after cleaning to make sure that the printer parts are completely dry. Ninety-nine percent IPA dries quickly; 90% IPA may take several minutes to dry. Caution: Rubbing alcohol may contain oils that leave undesirable residue on printer parts. Carefully read the label on the container. If the rubbing alcohol contains only isopropyl alcohol and deionized water, it is safe to use. To avoid harming the printer's internal components, never use water only to clean them. Using a cloth: Whenever the cleaning instructions refer to a lint-free cloth moistened with isopropyl alcohol (A), you can substitute a presoaked alcohol cloth (B). Using a swab: When the cleaning instructions direct you to use an alcohol-soaked swab, you can use the extra alcohol in a presoaked alcohol cloth packet to moisten the swab (C). Warning: Alcohol is flammable; keep alcohol-soaked cloths and swabs away from hot surfaces. To order presoaked alcohol cloth wipes, refer to Printer supplies. Return to Phaser 360 Topic List						Support Home Page Phaser 360 Support Page Network Printers Support Home Additional Information Register your Printer ASPs & TPMs About Software Support Color Connection Printer Warranties Material Safety Data Sheets Supplies & Cartridge Recycling Program