1. From the Control Panel, double-click Printers.

2. In the Printers dialog box, select the Tektronix Phaser 360 printer, then click Connect.

3. In the Connect dialog box, set the Timeout settings, then click OK:
   • Device Not Selected: Type a value in this text box to change the number of seconds Windows waits before notifying you that a printer is off-line. The default is 15 seconds, and is recommended.

   • Transmission Retry: On large or multiple-page documents you may see an Alert message that the printer is no longer accepting data before the job is completely sent to the printer. To avoid the Alert message, set this option to a larger value, such as 900 seconds (15 minutes).

4. In the Printers dialog box, click Setup. A dialog box appears with the printer's name across the top.

5. Click the following tabs to see printing options; refer to your Windows documentation for more information on tabs and options.

Features tab

PostScript tab

• In the Performance Options field, select the Use Language Level 2 or 3 Features option.

• Under PostScript timeout values, make these selections:
  • Leave the Job Timeout set to 0.

  • Set the Wait Timeout to a high value, such as 900 seconds (15 minutes) to make sure you do not lose a multipage job due to a timeout after the Transmission Retry Alert message is displayed.

• The PostScript header contains important PostScript information that must accompany each print job; it is not a banner page printed with each job. If an option is not selected, an error message is displayed on your computer screen and your job does not print. Click one of the following in the PostScript Header field:
  • Select Download Each Job. This option downloads PostScript header information with each print job, and is the recommended setting.

  • Select the Already Downloaded option to save the PostScript header information in the printer, then click the Download button. This option makes print files a little smaller and faster than the first option, but you need to click the Download button every time the printer is turned off or reset.

• For better performance, select the Binary Mode option.